Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: pickle me stupid on January 12, 2009, 03:36:01 am

Title: Hantarex Polo install questions
Post by: pickle me stupid on January 12, 2009, 03:36:01 am

i have an extra Hantarex Polo chassis
i recapped it as a learning project
now i need to install it to see if i did it right
the tubes i have to test it on are a rca a63adt10x05,or wgec 088x0387.001
will either work


thank  you

Title: Re: Hantarex Polo install questions
Post by: grantspain on January 12, 2009, 07:58:19 am

depends on the chassis,i.e for a 25" monitor it will say POLO 25
depends on the yoke resistance of the tubes as well
depends on the crt  neck pinout
example-
POLO 1 28"
Lh 1.49mh
Lv 24.5mh
Rh 1.6 ohm=horizontal yoke resistance
Rv 11.0 ohm=vertical yoke resistance