Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: lenub on December 23, 2008, 12:49:03 pm
-
I have a k7000 in a cbinet with a 1000-1 board
had the k7000 recapped due to dark half of the screen. I got it back and put it in and worked great .
Now no picture but sound ... the board is powered from another source from the k7000
so if I turn the power off to the monitor with 1000-1 still powered I see the game screen for a second as the monitor turns off.
any ideas before I start ripping into this
thanks
-
Bad solder joints maybe. More likely the B+ regulator IC has gone bad. It has an STR number on it. Replace only with the same type number or it's equivalent.
It will be one of these four numbers:
STR3130
STR30130
STR3123
STR30123
Most of those cross over to NTE brand replacements.
If it had an STR3130 then you need an STR3130 or it's NTE equivalent.
-
got my STR30130 from bob roberts and changed it out and now I have a picture BUT it doesn't fill the whole screen (it did before) tried to adjust everything but no go only fills 85/90 of the screen
any thoughts
-
pic ?..