Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: tyweed on June 19, 2003, 05:00:33 pm

Title: I have system 22 running by vivanonno but keys are c x z any way to remap these?
Post by: tyweed on June 19, 2003, 05:00:33 pm: I have vivavonno running system 22 roms which are ridge racer and rave racer. Thesed games are killer ! One major problem though i have mame setup on my six buttons on my cab but vivanonno uses c for gas and x for brake anyway i can change these somnehow? I use the i pac but would i be better reconfiguring vivanonno somehow please anyone who has dealt with this let me know what you did
Title: Re: I have system 22 running by vivanonno but keys are c x z any way to remap th
Post by: rusolinio on September 10, 2008, 04:01:48 pm: if you have an ipac you could use the winIPAC program to remap your buttons to match that of the vivanonno config.
Title: Re: I have system 22 running by vivanonno but keys are c x z any way to remap these?
Post by: SGT on September 10, 2008, 08:14:30 pm: If he replies after these 5 years, then he is the world's most patient poster. He mentions the ipac option, btw.
Title: Re: I have system 22 running by vivanonno but keys are c x z any way to remap these?
Post by: MKChamp on September 10, 2008, 09:53:10 pm: Quote from: SGT on September 10, 2008, 08:14:30 pm
If he replies after these 5 years, then he is the world's most patient poster. He mentions the ipac option, btw.

Hahaha
5 years and he never even threw in a *Bump*
Maybe AHK wasn't created 5 years ago...or he found it.
Title: Re: I have system 22 running by vivanonno but keys are c x z any way to remap th
Post by: rusolinio on September 11, 2008, 07:05:13 am: I had a similar issue very recently and found it whilst searching through the many threads regarding ridge racer. So, i thought i'd revive his issue for others to see.

I own an original stand up ridge racer cab which stopped working recently. I used vivanonno to judge the emulation of the game (not bad, but no comparison to the original) with a standard cp.

I suspect the board is fried in the RR machine as it no longer boots up, so i wish at some point to re-create it in my cab via emulation.

Ive had the steering wheel and pedals out and all use 10k pots. I know there are a few ways of connecting my controls to a pc (U-hid, A-pac interface) but im obviously going to use the vivanonno emulator to re-create the ridge racer series.

My issue now is that i cant figure out how to configure vivanonno to use my steering wheel and pedals?

Could i configure the steering controls with the A-pac/u-hid sofware first, and then have the prog run in the background when i start vivanonno to emulate the joystick control?

Anyway, sorry for my utter ignorance in not introducing myself, being my second post 'n all. I go a little scatty when video game obsession creeps in......
Title: Re: I have system 22 running by vivanonno but keys are c x z any way to remap these?
Post by: TAG on September 11, 2008, 03:18:18 pm: As I recall, Vivanonno accepts analog input, so you should have no trouble using the A-Pac or U-Hid with it. As I also recall, the emulator doesn't have the normal "coin up" and "player start" options (I think you hit Q for the service switch), so it might not be as straightforward to work into the original cab.
Title: Re: I have system 22 running by vivanonno but keys are c x z any way to remap th
Post by: rusolinio on September 12, 2008, 06:25:13 am: You have to press 'Q' for both the service switch (when pressed together with 'T' ) and credits. Will be a bit of a swine for sure. But hopefully it will still allow me to use my cab for the purpose it was designed for. Cheers for the input.