Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: SirPoonga on December 04, 2008, 11:14:02 pm

Title: Vector monitor help
Post by: SirPoonga on December 04, 2008, 11:14:02 pm

I have a WG 19v2000 that I know has a good tube and a EH G05 that works but has nasty burn in can I put the electronics from the EH into the WG (or tube from WG to EH)?

Title: Re: Vector monitor help
Post by: qrz on December 07, 2008, 09:17:41 pm

as long as the size and crt pinouts match, the tube can be subbed .
however, to avoid potential compatabilty issues , use the yoke from the working chassis

qrz

Title: Re: Vector monitor help
Post by: SirPoonga on December 08, 2008, 12:08:40 pm

Is replacing the yoke easy?

In theory i think it should work.  The WG 19v2000 is WG's clone of the EH G05.  The circuits are essentially the same.  I have a WG19v2000 I've been wanting to get working for a couple years.  However, I am not inclined to work with the HV circuit.  I know the problem lies in the HV circuit.