Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: acevedor2 on December 01, 2008, 01:19:23 am

Title: Coin Door Wiring
Post by: acevedor2 on December 01, 2008, 01:19:23 am

I know there are a bunch of threads and I know how to get the coin 1/2 hooked up to the IPAC.  My question is, do I have to send the grounds from the coin mechs back to the ipac as well, or will they work fine just grounded to the cab.

In other words, can i just run the positives from the coin mechs back to their respective ipac ports and then run the grounds to the cab, or do I have to run both positiver and ground from each mech back to the ipac?

Thanks as always!
Cheers!

Title: Re: Coin Door Wiring
Post by: Thenasty on December 01, 2008, 08:38:15 am

just try it, its quicker than typing this respond, but I connected the nd to the IPAC.  ;)

Title: Re: Coin Door Wiring
Post by: Franco B on December 01, 2008, 08:55:50 am

Just daisy chain the Common terminals (ground), wire them to the IPACs GND terminal and wire each NO (normally open) terminal to the IPACs input terminals (Player 1 coin, Player 2 coin etc)

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=51525.0;attach=113680;image)