Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: bhancoc4 on November 30, 2008, 02:12:34 am

Title: Need Monitor help Tekken 3
Post by: bhancoc4 on November 30, 2008, 02:12:34 am

Ok so I have a tekken 3 game and moved it from one room to my basment. When I got it to the basment it still worked fine and still turned on but all the guys looked like they were in wide screen. So i pulled off all the coneters and cleaned them. It worked fine for 5 min then the screen went all blue so I unpluged it over night then pluged it back in the morning it still blue I let it sit there for 10 min and now the game powers on but the screen just blank and no power is going to the monitor what should I do thanks

Title: Re: Need Monitor help Tekken 3
Post by: bhancoc4 on November 30, 2008, 02:16:16 am

The monitor is a wells u2000

Title: Re: Need Monitor help Tekken 3
Post by: grantspain on November 30, 2008, 04:51:09 am

i would say you have a few problems here but all bad solder/plug connections on the monitor

check around the flyback and neck card