Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: stephenp1983 on November 22, 2008, 06:09:08 pm
-
I have one of the happs trackball mounting plates that is currently black, not the zinc one. Is there a good method to painting these to match my cab. Something that would stick and not just flake off?
-
an oiled based paint won't come off. Like rustoleum gloss. That stuff lasts forever.
-
Would I just need to sand the exsisting black off and then apply the oil based paint of my choice?
-
Is there a good method to painting these to match my cab.
An exposed plate painted is still going to look unsightly, IMO. Considering you want to paint it, I can only assume you are concerned about aesthetics. Route out the wood, recess the plate and put CPO over it. It's not that hard and it'll look a zillion times better. ;)
-
Is there a good method to painting these to match my cab.
An exposed plate painted is still going to look unsightly, IMO. Considering you want to paint it, I can only assume you are concerned about aesthetics. Route out the wood, recess the plate and put CPO over it. It's not that hard and it'll look a zillion times better. ;)
I agree 100%