Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: dcninj4 on November 19, 2008, 10:22:04 pm

Title: xarcade tankstick question
Post by: dcninj4 on November 19, 2008, 10:22:04 pm

the original xarcade fit perfectly in my cab...the tankstick seems a bit bigger

anyone who owns it have the dimensions of the box under it for me? I know the top of the arcade panel hangs over the sides of the box under it, if that makes any sense... I'm trying to see the height, width, and length of the actual control box under the top of the panel, this way i can see if i can still fit it in my space or if I have to do some more modding... let me know if you have the dimensions or if you can get them, or if you don't understand what I'm asking... thanks :)

Title: Re: xarcade tankstick question
Post by: BobA on November 19, 2008, 10:41:47 pm

From x arcade site

"Specs are approx: 28.75 inches wide, 13 inches deep
Controller Base is 25.5x10.25. "

Title: Re: xarcade tankstick question
Post by: dcninj4 on November 20, 2008, 04:05:12 pm

thanks

Title: Re: xarcade tankstick question
Post by: DeLuSioNal29 on November 20, 2008, 04:18:47 pm

Too bad you don't have the X-Arcade Tankstick XXL Mame edition.  They wouldn't need any box at all.

(http://img182.imageshack.us/img182/8769/img7117fh2.jpg)

~ D

Title: Re: xarcade tankstick question
Post by: garnerb350 on November 21, 2008, 08:43:58 am

I'm going with the tankstick also..I saw where the XXL is 229$....YOW ( that hurts)....

Title: Re: xarcade tankstick question
Post by: Ginsu Victim on November 21, 2008, 09:49:29 am

The XXL was super-cheap for a while there.

Title: Re: xarcade tankstick question
Post by: dcninj4 on November 21, 2008, 12:12:02 pm

sucks was $100 :(