Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: caleb1883 on November 12, 2008, 12:34:06 pm
-
I recently acquired a MVC2 machine from an arcade auction, and of course the picture isn't quite right. The whole picture is horizontally to far to the left, and is curving off screen by a small margin. You can clearly see a space on the right side, about half inch size, where the picture should be. Anyways, I downloaded the manual, and it doesn't mention anything about a horizontal shift control. I thought maybe I would have to adjust that on the East/West board, but from what I have read, it seems as though the East/West is for a wavy picture. Mine isn't wavy, just too far to one side. Any help would be great.
-
I recently acquired a MVC2 machine from an arcade auction, and of course the picture isn't quite right. The whole picture is horizontally to far to the left, and is curving off screen by a small margin. You can clearly see a space on the right side, about half inch size, where the picture should be. Anyways, I downloaded the manual, and it doesn't mention anything about a horizontal shift control. I thought maybe I would have to adjust that on the East/West board, but from what I have read, it seems as though the East/West is for a wavy picture. Mine isn't wavy, just too far to one side. Any help would be great.
try posting this in the monitor section, more help there, like Ken Layton