Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: G1zm0 on November 10, 2008, 04:40:43 am

Title: u-hid nano wire
Post by: G1zm0 on November 10, 2008, 04:40:43 am

wiring up a uhid nano, im using a hd cable as a harness but when i connect  uhid  to it and meater it out it buzzes.

i take u hid out and put 1 prob to one pin and the other to the other pins and they all buz as if there a short in the uhid, tryed this with 2 hids, is this normal

Title: Re: u-hid nano wire
Post by: G1zm0 on November 12, 2008, 06:15:14 am

i wire my uhid up with floppy wire, but when i use the joystick i get up up up and down, no wires are touching and when i meter the connections 3 buzz when i touch the common, im thinking of directly wiring to the uhid to connections.

also when i connect uhid to pc, the light stays green then goes out and config cant find it till i do a firmware update, then it looses the setting.

also having probs with shift keys, i select the secondary key, set it up, set shift key, try use it and nothing.

Title: Re: u-hid nano wire
Post by: AndyWarne on November 12, 2008, 04:21:36 pm

Seems like you might need to drop me an email and hopefully I can help
andy@ultimarc.com