Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: crsdawg on November 09, 2008, 09:44:44 pm
-
Just as the title says, empty Baby Pac Cab you could use for a unique Mame project or whatever you'd like. It is in decent shape with some damage near the back edge on the right side. The side art is nearly complete (or complete, can't remember) and looks good. If you want the coind door and some of other stuff from it...we could probably work something out.
Located in Springfield, MO.
-
I could use the coin door if its in good shape.
-
will it fit in my basement?
-
will it fit in my basement?
How big is your basement? The cab is only a little deeper than a normal arcade game and about the same on the other dimensions.
I could use the coin door if its in good shape.
I'll sell the extra door but if someone takes the cab I want to give them first shot at it.
-
Could make an interesting basis for a Future Pinball project ...
-
Could make an interesting basis for a Future Pinball project ...
I thought the same thing. Another nice thing is a smaller pre-made cp, like the x-arcade or hotrod, will fit where the pinball portion used to go. It would be an easy conversion.
Here's a pic I found of the game before I parted it out. It is the one on the right. It is in nice shape with only the right side back edge being chewed up a bit.
-
A cab in that condition, I'm surprised you parted it. Hmmm.
-
The cab is decent, but it's not quite as nice as the picture makes it look. Not to mention the playfield was completely trashed, the harness hacked, and every board n/w. I don't like to part dedicated machines but this wouldn't have been reasonable project and the parts will go to help resurrect many needy machines (including the one on the left that, up until last week, has been missing parts and dead for many years).