Build Your Own Arcade Controls Forum
Main => Woodworking => Topic started by: sock2828 on November 08, 2008, 06:31:59 pm
-
I have been thinking of buying a broken cabinet from my local arcade and converting it into a MAME machine for almost two years now, and was wondering if it would be feasible to modify one into a modular cabinet like doc's?
http://www.beersmith.com/mame/
-
No one? :'(
-
yes?
You would need some sort of keyboard encoder and all the normal mame cab things. Just build a new control panel in a modular fashion with some way to hook up the individual modules to the keyboard encoder easily. I think most use cat-5 cables.
-
I probably should of mentioned that I don't want the CP to be wider than the cabinet if that makes any difference . I also found this.....
http://wiki.arcadecontrols.com/wiki/Velcro_Based_Modular_Panel
And will be implementing this design, guess I better make a few calls to my arcade tomorrow
-
You would need some sort of keyboard encoder and all the normal mame cab things. Just build a new control panel in a modular fashion with some way to hook up the individual modules to the keyboard encoder easily. I think most use cat-5 cables.
Do most really use cat-5? I used cat-5 for my joysticks but only used 1 wire of each pair and it works great. When I tried to hook up my 6 buttons I had to use both wires from a couple of pairs and I was getting multiple button pushes sometimes from what I assume was crosstalk because the pairs are twisted so tightly. If others are doing it successfully maybe I sould re-visit what I might have done incorrectly.
-Andrew