Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Darkmend on November 08, 2008, 01:00:54 pm
-
Im having some issues programming my Ipac4...
When I try to program the Ipac4 is timeouts every time. I did some research and purchased a multimeter and all my connections are good. Anyone have any thoughts on this?
Also, lets say I do get the Ipac4 programmed, do I need to go into my MAME and other emulators and change the controls there to mimic the Ipac4 setting?
Thanks in advance!
:cheers:
-
usb or ps2 connection?
if usb try ps2.
also make sure you have usb enabled in your pc's bios if your using a usb connection for keyboard and mouse.
-
Im using the Ipac4 with a ps2 connection.
Im also using a usb mouse that works fine with it, another problem I had was that the keyboard coming from the Ipac4 was not working, I assumed that the Ipac4 was the default for the controls, I have a adapter thats ps2>usb, ill try my keyboard on that instead of the Ipac "out" for some more trouble shooting
-
Ok now that I have my keyboard hooked up via ps2>usb connector the keyboard works, but now the Ipac4 isnt doing anything :angry: When I start up the WinIpac program to configure the buttons it doesnt detect anything when I push them. Any help on this issue would be great for this computer noob :banghead:
-
Finally after a day of troubleshooting my machine is working!!! :woot
-
What was the issue and how did you resolve it?
-
There is an option in winipac somewhere to increase the time it allows before timeout. I had an issue with it timing out so I increased it in the option and it worked fine.