Build Your Own Arcade Controls Forum
Main => Artwork => Topic started by: canardo on June 17, 2003, 08:57:40 am
-
Got a plee for some help
I have built my cabinet however have found it next to impossible to resize and combine gfx
So have a request for someone if they have some free time and fancy a mention on the cabinet build website when it goes up
What am I after (roughly very open to ideas)
the cabinet is very similar to this (based on kyles plans)
http://pacfan69.tripod.com/cabinets/id5.html
the spaces available for gfx is
5" x 9.5" for the instruction card space
5.5"x15.5" along the side of the cocktail top
20" x 15" for the hinged side
24"x 20" for the non hinged side
Mine at the moment has a black top yellow sides
and black control boxes with a red jstik and 3 buttons red green blue
the one player control box has a 1player and 2 player buttons on it
I will try and borrow a digital camera as the film I have used to take photos of it during progress is not finished(as the project isnt yet hehe)
Any help much appreciated and sure a reward will be given :)
also if you are in the UK I have access to a very good quality a3 laser colour printer at University
-
ps I have some HQ ms pacman style gfx just have no idea how to resize them
-
ps I have some HQ ms pacman style gfx just have no idea how to resize them
I have used a program called Shortcut Spline. It does work ok.
http://www.shortcut.nl (http://www.shortcut.nl)
PS. I am basing my cocktail cabinet on Bob's cocktail cabinet. It's very pretty.
-
You can get some Pacman art here:
http://www.oscarcontrols.com/gallery03.htm (http://www.oscarcontrols.com/gallery03.htm)