Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: mrclean on November 06, 2008, 01:34:16 pm
-
Looking to purchase 3x
.187 quick disconnect male, that branches off to two female .187's almost like a "y" adaptor so to speak. or really mini daisy chain.
the attached photo on the bottom is from jammaboards.com, i basically need the oposite of that, but with longer wires maybe 2 ft between each female
-
Just curious why?
-
because of this:
http://forum.arcadecontrols.com/index.php?topic=86342.0
or in short.. for my left handed friends
-
I gotcha. Why don't you just rewire it for about a buck? Remove the old disconnects, strip back, add wire, crimp in?
-
i really don't want to do it to begin with but this way i won't be messing with the jamma harness etc i feel like it should be working without having to do this maybe not though i have no idea i have a feeling that line c002 is most likely for "cocktail" mode
-
You're not messing with the JAMMA harness, you're just splitting the input. It's dead easy, and you can be up and running in about 1/2 an hour if you're slow.
-
You can most likely buy the wire, connectors and a pair of crimpers locally for less than the cost of shipping pre-made ones from elsewhere. Head to Fry's or your local equivalent.
-
And if you don't know how this is a damn fine way to learn. Low cost, no danger of breaking anything. If you want to have arcade games this is something you need the ability to do.
-
Yep -- either rewire those three buttons (best recommendation) or make the adaptors yourself.
-
What these guys said. Buy yourself a crimper and DIY. It's a skill you'll probably need sometime in the future.