Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: ctozzi on November 02, 2008, 11:46:18 pm

Title: black faint bars moving in my medium resolution K 7500 help
Post by: ctozzi on November 02, 2008, 11:46:18 pm

when i looked at the monitor it was fine, now that its at my house it has these faint black bars going from top to bottom. Any help appreciatted

Title: Re: black faint bars moving in my medium resolution K 7500 help
Post by: grantspain on November 03, 2008, 02:26:27 pm

sounds like an earth related issue,make sure you monitor frame reads continuity to the earth pin of the machine plug

Title: Re: black faint bars moving in my medium resolution K 7500 help
Post by: Tenn_pin on November 08, 2008, 11:48:23 pm

I just had the same issue with a 4600 series.  I had to run a wire from the monitor chassie to the board ground (corner screw hole) and then to the neg pole on the power supply.  Good luck.  I fought this thing for over a month after a cap kit.

R