Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Martijn on October 30, 2008, 01:54:51 pm

Title: u360 1 button not working
Post by: Martijn on October 30, 2008, 01:54:51 pm

i hooked up 2 u360 with wireing harnass
all buttons work for player 1
and for ID2 player 2 all buttons work exept button 5
the green wire.

i checked the microswitch and replaced it, and also the green wire is good till the u360 motherboard pin, i tested with a multimeter.

what could be wrong?

Title: Re: u360 1 button not working
Post by: Ginsu Victim on October 30, 2008, 02:04:35 pm

Have you touched the wires together without running through a switch? Does it show the button working?

Title: Re: u360 1 button not working
Post by: Martijn on October 30, 2008, 02:38:55 pm

tried that

connected wires on the mainboard from green point to gnd

Title: Re: u360 1 button not working
Post by: Ginsu Victim on October 30, 2008, 02:41:15 pm

and did it register at all?

Title: Re: u360 1 button not working
Post by: Martijn on October 30, 2008, 02:45:16 pm

nope, dead

i flashed from 2.3 to 2.4

still same problem

i think its broken :(

how is this possible..

Title: Re: u360 1 button not working
Post by: Martijn on October 30, 2008, 02:50:12 pm

ok the track on the pcboard is broken. its not connected to the u360 IC

so no connection from u360 IC to pin green wire.

good thing i can solder this :)

Title: Re: u360 1 button not working
Post by: Martijn on October 30, 2008, 02:57:00 pm

soldered it, and its working again..

pfew.. saved my trouble of shipping etc..