Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: subedriver on October 19, 2008, 12:17:46 am

Title: quick jpac question
Post by: subedriver on October 19, 2008, 12:17:46 am

In using a jpac to connect to my arcade monitor with my pc, it will display the correct 15hz right?  It says on ultimarcs website thats it's not for application use.  So would I have to get a arcade vga card?  Would be a temp solution as I plan on putting a tv in it later.

Title: Re: quick jpac question
Post by: TPB on October 19, 2008, 01:07:40 am

To display your video output at 15 khz, you'll either need :

** The ArcadeVGA card, or

** Run the software called "Soft 15khz", written by SailorSat, who's a BYOAC contributor.


There's plenty of threads on Soft 15khz, if you search for them.

Here's a few pages of info., to get you started :

http://wiki.arcadecontrols.com/wiki/Soft-15khz

http://forum.arcadecontrols.com/index.php?PHPSESSID=71c98878b0e50314e6bef2742ec4307a&topic=66402.1120

http://community.arcadeinfo.de/forumdisplay.php?f=142

Title: Re: quick jpac question
Post by: subedriver on October 20, 2008, 02:29:32 pm

thanks for th reply will do some more reading on that, sounds like its gonna be the way to go.