Build Your Own Arcade Controls Forum

Main => Everything Else => Topic started by: Robbbert on October 13, 2008, 02:55:56 am

Title: Hi, new member here
Post by: Robbbert on October 13, 2008, 02:55:56 am

Hi all,

My name is Robert and I'm the current writer for MisfitMAME.

I joined after seeing a few topics posted on that very subject.

Noticed a few familiar faces. Hope I'm welcome here.  ;)

Title: Re: Hi, new member here
Post by: Singapura on October 13, 2008, 05:12:53 am

Hi Robert, you're very welcome here!  ;D I was looking into MisfitMame myself. Are you going to update soon?

Title: Re: Hi, new member here
Post by: Robbbert on October 13, 2008, 06:10:15 am

I did, last week.  ;) The current version is 0.127.B

Title: Re: Hi, new member here
Post by: DaveMMR on October 13, 2008, 08:35:23 am

Quote from: Robbbert on October 13, 2008, 02:55:56 am

Hope I'm welcome here.  ;)

No!  Just kidding.   ;D   Welcome.

I haven't played with MisfitMAME for a while, I should go check it out again. 

Title: Re: Hi, new member here
Post by: loess on October 13, 2008, 08:54:42 pm

 :applaud: haha... you're welcome here

Title: Re: Hi, new member here
Post by: Ummon on October 13, 2008, 11:43:30 pm

Quote from: Robbbert on October 13, 2008, 06:10:15 am

I did, last week.  ;) The current version is 0.127.B

Hello. Do you have a new page? The old one shows .122 as last.

Title: Re: Hi, new member here
Post by: Robbbert on October 14, 2008, 02:09:19 am

The problem is that the site is owned and controlled by Tinker, but he isn't around much anymore.

I have no site of my own, all releases are done via the misfitmame forum over at mameworld.

http://www.mameworld.info/ubbthreads/postlist.php?Cat=&Board=misfitmame

Title: Re: Hi, new member here
Post by: danny_galaga on October 14, 2008, 02:28:01 am

greetings!

Title: Re: Hi, new member here
Post by: Ummon on October 15, 2008, 09:00:25 pm

Ah, thanks. Now hopefully someone will make UI version.

Title: Re: Hi, new member here
Post by: Robbbert on October 16, 2008, 02:15:35 am

One thing you should know, is that I do not own a cabinet or special controls.
I only use the keyboard. So, if you find that your controller doesn't work properly, or some special setup has issues, you'll know that I have no way to test or fix it.

However, if any of you are knowledgeable on mame coding, and you have a tested, working, solution to some problem, by all means submit it to me.