The NEW Build Your Own Arcade Controls

Main => Audio/Jukebox/MP3 Forum => Topic started by: dryker on October 06, 2008, 06:06:05 pm

Title: help with a RI-1 rowe jukebox
Post by: dryker on October 06, 2008, 06:06:05 pm

I have a rowe RI-1 and when you push a record sel/ like a-1 they stay in and the
mem/unit in the box just keeps spinning and does not kick out a pin to sel/a record
or stop

Do you thank the coil is bad


Dennis
restezrk@verizon.net

Title: Re: help with a RI-1 rowe jukebox
Post by: Ken Layton on October 07, 2008, 10:39:14 am

Probably a bad relay contact on the keyboard assembly.

Title: Re: help with a RI-1 rowe jukebox
Post by: dryker on October 07, 2008, 07:14:30 pm

I thank your right Ken , I got the lid open  and ever thing look read dirty in there.

What should I use to clean up ever thing up in there on the key borad Sw and the

points on relay. I know wd 40 is a no no.

Dennis

Title: Re: help with a RI-1 rowe jukebox
Post by: Ken Layton on October 07, 2008, 11:43:01 pm

Go to the auto parts store and buy an automobile ignition points file. You'll use that to file the tarnished/pitted/burned contacts on the open frame relay blade (leaf) switches on the keyboard tray assembly. To properly adjust the switch blade gap, you'll need a switch blade adjuster from a pinball machine parts supplier like www.pbresource.com

Naturally you do this with the power off (machine unplugged from the wall outlet).