Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: 1badtwo on September 02, 2008, 10:59:18 am
-
Hi guys, hope you can give me a little help. I'm kinda of a newb when it comes to reading schematics, I have a WG K7000 that has a hairline crack in the blue adjustment. What is that part called? Is it a trimmer pot?
If you look at this picture its the farthest POT to the right on the flyback (ignore the other mark, this isnt my image)http://jstookey.com/arcade/WG_25k7191/WG_25K7191_pot_zoom_out.JPG (http://jstookey.com/arcade/WG_25k7191/WG_25K7191_pot_zoom_out.JPG)
here is the schematic http://jstookey.com/arcade/WG_25k7191/k7191-complete_lg_.jpg (http://jstookey.com/arcade/WG_25k7191/k7191-complete_lg_.jpg)
is it VR206?
Here is WG parts list... http://www.wellsgardner.com/pdf/Spec/K7000.pdf (http://www.wellsgardner.com/pdf/Spec/K7000.pdf)
VR206 says its CTRL 200. Anyone know where I can buy one POT? Bob Roberts site says he is shut down for until the storm passes.
Any help would be greatly appreciated!
Thanks in advance!
*update* I ordered a 200 OHM pot from ebay. Guess this can be deleted.