The NEW Build Your Own Arcade Controls
Main => Buy/Sell/Trade - non-retail => Topic started by: nullb0y on August 24, 2008, 05:10:14 pm
-
I need some rubber or plastic molding for the front edge of the cp
2 reasons
It needs to cover some screws holding the front plate on
and the rough edges on my cp
I Was looking at some stair noses but they want you to buy alot of them at once
(http://img.alibaba.com/photo/11321109/Sell_Stair_Nose_Stair_Nosing.jpg)
something like this in plastic or rubber
I have a similar rough edge on my CP i need to screw some wood down and want to cover the screws
A couple barstools like you would find in an arcade (chrome and black material on top)
-
:dizzy:
-
bump
-
keep it alive bump :dizzy:
-
I have a barely used tornado spinner. Make me an offer. :cheers:
-
Joystick and panel latches shipped. Enjoy.
-
pm sent about the spinner
-
So alexred set you up with a blue handle? I have half of a tron handle that's not broken - I'd have to see which side it is, but I'd be happy to sell it since I have no use for it.
-
You want t-molding? I have a few feet of red. Yours if you want it.
-
So alexred set you up with a blue handle? I have half of a tron handle that's not broken - I'd have to see which side it is, but I'd be happy to sell it since I have no use for it.
ShanMan - Could you check which half you half please. I need a right half and would buy yours if it's reasonable. LMK & Thanks.
Encryptor
-
Ah, dont need t-molding
i need a 90* bend
I need the left half of the tron stick
He gave me the right half
-
Ah, dont need t-molding
i need a 90* bend
I need the left half of the tron stick
He gave me the right half
See my last post above yours. I need the right half. Can we work a deal?
Encryptor
-
Encryptor, sorry I'd love to help you out but this is the left side.
Nullb0y, looks like you're in luck! It's yours if we can work out a deal. See picture. It has 3 "internal" cracks leading from the screw holes but even that big one doesn't seem to be threatening the integrity of it - the crack ends where the plastic bends inward at the bottom (you can easily see the whole crack from the picture). Otherwise it looks very nice to me. I don't have much of a feel for what it's worth, but I'm not looking to get rich off of it either. I'll try to make that determination and in the meantime you're welcome to make an offer if you wish.
-
I dropped you a pm :cheers:
-
Ah, dont need t-molding
i need a 90* bend
I need the left half of the tron stick
He gave me the right half
See my last post above yours. I need the right half. Can we work a deal?
Encryptor
nullb0y - Can we work a deal for the half you don't need? LMK
Encryptor
-
you mean the black left half? only if i get a blue left half lol
-
I need a blue right half. I thought alexred sent you a blue right half that you didn't need. Was I mistaken and he sent you a black half?
Encryptor
-
No, i bought a joystick with a black left half and a blue right half
I want a blue left half to match my blue right half
so the black left half would be the extra part if i get a new left
-
Ah, dont need t-molding
i need a 90* bend
I need the left half of the tron stick
He gave me the right half
I'm missing something here. In the quote above you say you need the left half and he gave you the right half. Is that the one you are saying is black?
-
No no, i purchased a tron stick from him
the left half is black
the right half is the blue
Sorry, I am confusing some times
-
Oh ok. Now I understand. I think what was confusing was that in your first post you say you got a Tron joystick and a couple of posts down after that alexred says he shipped the joystick and panel latches. Then you say he shipped the wrong half.
I thought you already had the stick and he sent you a half but it was the wrong one. Thanks for clearing that up for me. If you come across anyone with a right half that's what I need. Thanks.
Encryptor
-
Quite allright, i tend to stumble with words more then not.
-
Bumping, i still am looking for everything The spinner got sold to someone else before he got pictures for me....
-
got outbid on the ebay spinner...
Still looking for different ones....
-
Just get a TT2 spinner from GGG - best spinner you can buy. Plus, I got the Tron knob and it looks great!
-
a what from where? lol
-
Ha - lots of abbreviations there. For anyone that's wondering:
http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=86&products_id=268 (http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=86&products_id=268)
-
how is the turbo twist 2?
ive got a couple arcanoid spinners heading my way right now
-
Awesome now i have my left half of my tron stick in blue as well
-
That's good to hear. I'm still looking for the right half.
Encryptor
-
if you decide you want to go black left half let me know lol
-
bumpy, bump bump
:dizzy: :dizzy: :dizzy: :dizzy:
-
bump? :dizzy: :dizzy: :dizzy:
-
bump? ??? ??? ???bump? ??? ??? ???
:dizzy: :dizzy: :dizzy: :dizzy: :dizzy:
-
Its dead. Let it RIP ;) :blah:
-
Gee, thanks ed
I guess ill take that as a helpful bump ;) :cheers:
-
still looking for corner molding and barstools
-
revive!