Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: The cranky hermit on June 10, 2003, 09:27:36 am
-
I am going to get the Wico/Suzo 2 1/4" trackball. It does not come with a mounting plate or bolts. I am going to order what I need from http://www.dameon.net/BBBB/parts.html#tbs
It looks like the mounting plate I need is the Atari TB 2
-
I am going to get the Wico/Suzo 2 1/4" trackball. It does not come with a mounting plate or bolts. I am going to order what I need from http://www.dameon.net/BBBB/parts.html#tbs
It looks like the mounting plate I need is the Atari TB 2
-
Are you using 3/4 MDF or a metal CP? If you are using an orignal metal CP, you don't need the mounting hardware.
-
I'll be using 3/4" wood of some kind. Is MDF the most popular type for all-wood CPs? I'm not going to use any plexi or any of that stuff.
-
I'll be using 3/4" wood of some kind. Is MDF the most popular type for all-wood CPs? I'm not going to use any plexi or any of that stuff.
Yes it is... it's very smooth, and great for painting (or laminating, or vinlying)... plywood's ok too, but I'd think you'd only go that route if (a. it was handy or b. you got cabinet grade plywood and stained it )
that's just a quick outline.
rampy
-
I am going to get the Wico/Suzo 2 1/4" trackball. It does not come with a mounting plate or bolts. I am going to order what I need from http://www.dameon.net/BBBB/parts.html#tbs
It looks like the mounting plate I need is the Atari TB 2