Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: stan2323 on August 12, 2008, 12:22:54 pm
-
I have 16 coin acceptors from I think vending machines. See the pictures. I tested them with a US quarter and the number on the tape is the number of times the quarter went through as it should. Some went through with a bit of a shake but I did not count those. I tried a US nickel and dime but they would not go through. I believe they are set to accept Canadian coins of different types. They have slots on the end for different switches and a couple still have the multi switch attached. They are in OK shape with some light rust and a couple has some corrosion. They may be easily cleaned up and lubed for use. These are larger than the standard coin mechs in arcade games. I think they are for vending machines but if you have a vending machine coin door they would work in an arcade.
Price is $8 plus shipping. They weigh 35 pounds so shipping could be expensive. If someone wants to do a local pick up that would be best. Must take all.
(http://i171.photobucket.com/albums/u293/stan2323/DCP_3476.jpg)
(http://i171.photobucket.com/albums/u293/stan2323/DCP_3477.jpg)
(http://i171.photobucket.com/albums/u293/stan2323/DCP_3478.jpg)
Stan