Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: emopants92 on August 03, 2008, 12:24:19 pm

Title: Ultimarc Small 2 1/4 inch mounting plate?
Post by: emopants92 on August 03, 2008, 12:24:19 pm

Ok can someone tell me what are the Length, Width of the mounting plate for the Ultimarc Small 2 1/4 inch mounting plate. Because I am working on a control panel now but need a general idea of how big it is. Thanks

Title: Re: Ultimarc Small 2 1/4 inch mounting plate?
Post by: Blanka on August 03, 2008, 01:34:14 pm

I just put it under a 48mm hole in the 3mm thick panel. Then there are no bolts or edges visible. Much nicer than a mounting plate.

Title: Re: Ultimarc Small 2 1/4 inch mounting plate?
Post by: emopants92 on August 03, 2008, 05:51:56 pm

How did you strap it to the CP?

Title: Re: Ultimarc Small 2 1/4 inch mounting plate?
Post by: AndyWarne on August 04, 2008, 01:48:48 pm

There are diagrams of the trackball and plate on http://www.ultimarc.com/controldiags.html (http://www.ultimarc.com/controldiags.html)
Andy