Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: GAtekwriter on July 31, 2008, 05:30:43 pm

Title: Wiring photo walkthrough?
Post by: GAtekwriter on July 31, 2008, 05:30:43 pm

(I love byoac.com but searching through the years of previous discussions is difficult - needle in 5 haystacks?)

Does anyone know of a forum thread or project where the builder did a really good job of documenting the CP wiring?  I'm staring at all the electronics (controller, LED-Wiz, buttons, joys, etc.) and just feeling a little overwhelmed for a moment...

I realize that many builder just learned by doing, but I sure would hate to mount some of these controllers or other devices and find I placed them in an illogical location.  Help will be greatly appreciated (by me, AND for a few new builders who I'm following and will be fast approaching this part of the project).

Thanks in advance.

Jim

Title: Re: Wiring photo walkthrough?
Post by: DeLuSioNal29 on July 31, 2008, 06:09:46 pm

Have you checked these videos out?

http://forum.arcadecontrols.com/index.php?topic=80229.0

~ DeLuSioNaL

Title: Re: Wiring photo walkthrough?
Post by: Encryptor on July 31, 2008, 07:44:24 pm

Here's 2 that I have.

http://spystyle.arcadecontrols.com/01/index8.htm

http://webpages.charter.net/rbecker5/plans.html#wiring


Encryptor

Title: Re: Wiring photo walkthrough?
Post by: GAtekwriter on August 01, 2008, 09:22:55 am

Awesome!  Thanks, guys!

Jim