Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: shilmover on July 29, 2008, 05:38:14 pm

Title: Using a HAPP Analog Joystick as a Yoke... Was:Star Wars Yoke Pinout
Post by: shilmover on July 29, 2008, 05:38:14 pm

Hi all. 

Anyone know where I can get the pin outs for the Star Wars Yoke?

Title: Re: Star Wars Yoke Pinout
Post by: kayoteq on July 29, 2008, 08:44:43 pm

Sorry, the google fails me. Mail it to me and I'll get back to you with the wiring specs. eventually.  ;D

Use the multimeter, Luke. Trust me.

Title: Re: Star Wars Yoke Pinout
Post by: Kevin Mullins on July 30, 2008, 12:56:04 am

Have ya tried looking at the schematic in the Star Wars Manual ?

STAR WARS (http://arcarc.xmission.com/PDF_Arcade_Atari_Kee/Star_Wars/Star_Wars_SP-225_1st_Printing.pdf)

Title: Re: Star Wars Yoke Pinout
Post by: shilmover on July 30, 2008, 02:24:42 am

I thought I did.  I will look again.  :)

B

Quote from: Kevin Mullins on July 30, 2008, 12:56:04 am

Have ya tried looking at the schematic in the Star Wars Manual ?

STAR WARS (http://arcarc.xmission.com/PDF_Arcade_Atari_Kee/Star_Wars/Star_Wars_SP-225_1st_Printing.pdf)

Title: Re: Star Wars Yoke Pinout
Post by: shilmover on July 30, 2008, 02:25:52 am

I am trying to connect one of the HAPP Analog Joystick With Trigger Guard Handle (http://www.happcontrols.com/joysticks/95092300r.htm) to my Star Wars test Harness.  Has anyone done this?

Barry