Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: MinerAl on July 26, 2008, 10:36:03 pm

Title: JAMMA to a WG K4600
Post by: MinerAl on July 26, 2008, 10:36:03 pm

WG K4600 P307 or P317 (according to Menace's faq via Ken Layton).

The JAMMA board I'm using outputs R, G, B, ground, and "Vertical Sync" (no mention of positive or negative), but there are input pins on the yoke daughter card for R, G, B, ground, vert+, horiz+, vert-, and horiz-.

Will I be able to use this monitor with this board?

Title: Re: JAMMA to a WG K4600
Post by: Ken Layton on July 26, 2008, 11:25:57 pm

JAMMA standard sync is composite negative sync. Connect to the -H sync pin on the 4600's video interface board.

Title: Re: JAMMA to a WG K4600
Post by: MinerAl on July 27, 2008, 12:54:31 am

Thanks Ken!