Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: superjoe on July 26, 2008, 01:49:56 pm

Title: I-Pac only comes on after reboot!?
Post by: superjoe on July 26, 2008, 01:49:56 pm

Hey!

I have a problem:) When I turn on my arcade, the controls doesn't work. When I reboot
they work. It's 100% everytime, I have to do it twice.

I have several I-Pacs, and have tried different ones. Same problem.

I've never had a problem before, always used I-Pacs with PS/2.

Any ideas?

Title: Re: I-Pac only comes on after reboot!?
Post by: AndyWarne on July 26, 2008, 02:22:07 pm

There could be a problem with the keyboard connected to the pass-through if you have one. Can you try another keyboard.
Or drop me an email: andy@ultimarc.com

Title: Re: I-Pac only comes on after reboot!?
Post by: Franco B on July 26, 2008, 03:00:42 pm

KA-POW!

Product support at it's finest  :applaud:

Title: Re: I-Pac only comes on after reboot!?
Post by: Ginsu Victim on July 26, 2008, 10:53:03 pm

I know sometimes when I start my PC with "recover after power failure", I get a keyboard error. I have to restart it (sometimes several times) to fix it. It's a PC problem, not an Ipac problem.

Title: Re: I-Pac only comes on after reboot!?
Post by: superjoe on July 27, 2008, 05:29:26 am

Hey Andy and guys

I don't have keyboard connected...and it's certainly not the I-Pac

Title: Re: I-Pac only comes on after reboot!?
Post by: Ginsu Victim on July 27, 2008, 11:29:51 am

When I say "keyboard error" I don't mean the keyboard. I mean the PS/2 keyboard port, which includes the Ipac.