Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: mrclean on July 23, 2008, 04:16:05 pm

Title: Adding coin door, In MAME can i have it use 5,6 and 2 other keys as "coin 1 / 2"
Post by: mrclean on July 23, 2008, 04:16:05 pm

on the side of my current MAME Cab I have 2 "pinball buttons", which also double as Coin 1, and Coin 2  keys 5 and 6 etc.. is there any way I can have other "keys" in addition to 5 & 6 function as my add coin buttons ? I have an IDE Cable hooked up into a mini pac, and while testing the free wires that arent being utilized with ultimarcs winipac i have about litterally 7 free keys.. such as : "r" etc..

Title: Re: Adding coin door, In MAME can i have it use 5,6 and 2 other keys as "coin 1 / 2"
Post by: Ginsu Victim on July 23, 2008, 04:48:37 pm

Just going into the button setup in MAME and select COIN 1 and press the button you want, then select it again without moving off of it, and press the switch on the coin mech. Then do the same for COIN 2.

Hope that was clear enough.