Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: collywobbles007 on July 22, 2008, 05:33:21 pm

Title: Small coin door measurements
Post by: collywobbles007 on July 22, 2008, 05:33:21 pm

Hi,

Does anyone know what the cut-out measurements required to fit one of the small coin doors on sale at Happ Controls. I'm interested in the single coin entry version (model 40-0708-00). I've requested the dimensions from Happ but haven't had any response.

Any help appreciated as I need to get my cocktail cabinet pre-cut.

Thanks,
Collywobbles

Title: Re: Small coin door measurements
Post by: Paulson on July 22, 2008, 05:55:09 pm

 Err...there are quite a few coin doors on the Happ site...
 If it is this one it fits an aperture 8.5 x 7.5

(http://i214.photobucket.com/albums/cc22/Paul-son/coindoorbig.jpg)

Title: Re: Small coin door measurements
Post by: collywobbles007 on July 22, 2008, 06:30:14 pm

Hi,

Thanks for the reply. That's not it though. I provided the model no. - if you punch it in you'll see which one.

Title: Re: Small coin door measurements
Post by: Paulson on July 22, 2008, 08:02:11 pm

 HI, sorry I couldn't find the measurements either...even with that ref. number
BTW...did you know that door has a dummy coin mech?

Title: Re: Small coin door measurements
Post by: Paulson on July 22, 2008, 08:04:01 pm

 Anyways you are probably better off e-mailing Happ & asking them.

Title: Re: Small coin door measurements
Post by: collywobbles007 on July 23, 2008, 04:37:01 am

I didn't know it was a dummy mechanism! That's no good!

Any suggestions on what is the best coin door for a cocktail cabinet? Maybe I should make that a new post.

Title: Re: Small coin door measurements
Post by: AndyWarne on July 23, 2008, 05:03:20 am

The door in the picture is the one we sell. Note that the mech is sold separately as on the Happ site.

Andy