Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: ctozzi on July 18, 2008, 01:12:52 am
-
I'm just waiting for my custom control panel and finishing up all the small stuff. Since I tore all the guts out of this cabinet there is only a power strip to power things like the monitor and computer/lights. So my question is how do I add working lamps in the coin doors ? the setup has all the stock parts behind the $.25 logos including the mechs, but I do not know how to add power to them to get them to turn on while the machine is on for that arcade look. Plus I want it to match my other 2 dedicated Cabs.
-
wire them off the PC power supply
-
do you have any pictures on how to do this ?
-
I have the coin door sockets in stock & i would use a ultimarc triple led, these are $1.90 send me a pm if you need a quote
dm
-
There is a Video 'how to' [Here (http://www.retroblast.com/2004020344/Videos/Coin-Door-Lights-_-Super-Bright-LEDs.php)]
-
That is the video I used worked like a charm
-
awesome thanks
-
I have the coin door sockets in stock & i would use a ultimarc triple led, these are $1.90 send me a pm if you need a quote
dm
you should get those, next time my bulbs blow I will. the life expectancy is SOOOOOOOOOO much better on the LEDs
-
if they are wedge style bulbs you can get those at most auto parts stores as they are also used in dash board and instrument panels. Plus you can get them as leds.
-
Got it all wired up thanks guys here is the finished copin door, just waiting for my custom Mortal Kombat Mame control panel. Check it out here's a few pics.