Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Kabukiman on July 15, 2008, 09:55:05 am

Title: IPAC2 question.
Post by: Kabukiman on July 15, 2008, 09:55:05 am

I searched and couldn't find my answer I have two IPAC2's since I planned on building another Mame machine, I would like to add a third player to my current Mame machine. My question is can I link the two IPAC's using the KBD Passthrough? if so how would I go about doing that? Thanks in advance.

Title: Re: IPAC2 question.
Post by: scotthh on July 15, 2008, 01:15:25 pm

From Ultimarc's I-PAC instructions: (http://www.ultimarc.com/ipac2.html)
"USING TWO I-PACs TOGETHER: Two boards can be used for doubling the number of inputs. The second board can be connected to the pass-thru connector of the first. Or either connect both boards to USB or the first to the keyboard port and second to USB. Each board can be individually programmed with the required code set, then the two boards can be connected together as above."
(edit: fixed link)

Title: Re: IPAC2 question.
Post by: Kabukiman on July 16, 2008, 10:43:16 am

im an idiot I must of read right over that on his site. Thanks  :banghead: