Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: TAG on July 10, 2008, 01:00:48 pm

Title: t-molding on the control panel
Post by: TAG on July 10, 2008, 01:00:48 pm

For those of you with control panels that extend beyond the outer edges of the cabinet, and for those who've put t-molding along the edge of the top of the control panel...do you have the t-molding going all the way around, or do you not bother with putting it on the back of the panel top?  Thanks!

Title: Re: t-molding on the control panel
Post by: Doctor Ugs on July 10, 2008, 03:50:11 pm

i put mine all around.

Title: Re: t-molding on the control panel
Post by: Zeno on July 25, 2008, 03:16:07 pm

I think it is totally dependent on the individual CP.

I have a metal flush plate that is on the back of mine.  The T-molding only covers about 1/3 of the back.

Generally, I would say to wrap it as much as you can.