Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: danfman on July 03, 2008, 01:30:17 pm

Title: Cocktail drawing files
Post by: danfman on July 03, 2008, 01:30:17 pm: Where can I find detailed drawings or preferably AutoCAD or Inventor software files for building a cocktail cabinet?
Title: Re: Cocktail drawing files
Post by: Franco B on July 03, 2008, 01:32:52 pm: You can find Pacman/MsPacman plans [Here (http://www.mikesarcade.com/arcade/cabplans.html)]
Title: Re: Cocktail drawing files
Post by: mcfreak on July 03, 2008, 03:09:27 pm: Am I missing where they give you the radius of the corners of the glass? I know it's 22x32 at 1/4th thickness but I don't see the corner radius...
Title: Re: Cocktail drawing files
Post by: Franco B on July 03, 2008, 04:24:28 pm: 4"?

(http://img.photobucket.com/albums/v325/Francoberasi/Radius.png)
Title: Re: Cocktail drawing files
Post by: mcfreak on July 03, 2008, 09:24:27 pm: Crap, well the one I already ordered and shipped is 3 and 3/8". Hopefully it is close enough...
Title: Re: Cocktail drawing files
Post by: Ginsu Victim on July 03, 2008, 11:43:27 pm: So....no one else saw this topic as "Cocktail drawing FLIES"? :)
Title: Re: Cocktail drawing files
Post by: custard80 on July 07, 2008, 10:45:02 am: have my autocad drawings for my 3 sided cocktail based on Ms pacman.

It is lightly customised to have a larger top to cover the sides of the long control panel. With a normal sized top they would be visible.

The vent holes etc are my own positions and there is a hinged panel on one of the short sides for access.

There is also a cutting template that i took to Wickes so they could cut the main panels.

You are welcome to use them for personal use, not for re-sale. I thought about selling them on ebay but cant be bothered to write a load of instructions!

Here is a pic without the monitor or lid on in my mess!

Let me know what format you want them in.

My the way they are metric. drawn in mm.

I also have AI size adjusted underlays.
Title: Re: Cocktail drawing files
Post by: danfman on July 08, 2008, 11:38:01 am: Any .dwg file should be OK I have AutoCAD 2008.
Title: Re: Cocktail drawing files
Post by: shardian on July 08, 2008, 11:39:25 am: Quote from: mcfreak on July 03, 2008, 09:24:27 pm
Crap, well the one I already ordered and shipped is 3 and 3/8". Hopefully it is close enough...

You can always modify your cabinet top to fit the glass.
Title: Re: Cocktail drawing files
Post by: mcfreak on July 08, 2008, 11:50:02 am: Quote from: shardian on July 08, 2008, 11:39:25 am
Quote from: mcfreak on July 03, 2008, 09:24:27 pm
Crap, well the one I already ordered and shipped is 3 and 3/8". Hopefully it is close enough...

You can always modify your cabinet top to fit the glass.

We will see tomorrow when the glass gets here. I didn't actually start a thread on the restore of my Galaga Cocktail but I took pictures of the progress.
Title: Re: Cocktail drawing files
Post by: mcfreak on July 10, 2008, 11:24:51 am: Turned out perfect. onedayglass rocks! Anyone in DFW need a scratched up midway cocktail glass, free for the takin? :)
Title: Re: Cocktail drawing files
Post by: custard80 on July 15, 2008, 07:56:05 am: Email sent to danfman.

Let me know what you think and if they may be of use to others. :)