Build Your Own Arcade Controls Forum

Arcade Collecting => Restorations & repair => Topic started by: RayB on June 01, 2008, 06:59:03 pm

Title: Sega Turbo mini
Post by: RayB on June 01, 2008, 06:59:03 pm

I got a Sega Turbo mini.  Fully working and complete.

I won't have to do much to this one other than:

• Re-paint a few metal frame parts, maybe the coin door.
• Add black laminate to the front (I always prefer that to painting)
• Find and install proper start button (currently has an Atari cone button)
• Print up an instruction card
• Figure out what logo used to be on the shifter and print one out
• Find or make one side-art decal.

All very low-priority considering I am on a budget and have other projects with higher priority.

Title: Re: Sega Turbo mini
Post by: danny_galaga on June 02, 2008, 06:12:48 am

pics?

Title: Re: Sega Turbo mini
Post by: RayB on June 02, 2008, 11:52:07 pm

Photo added.
Anyone know what the logo on the shifter is supposed to be?

Anyone know if there's supposed to be some kind of insert in the middle of the steering wheel?

Title: Re: Sega Turbo mini
Post by: danny_galaga on June 03, 2008, 04:57:48 am

nice (",) could this have been the origin of black cabs with blue t-molding?

Title: Re: Sega Turbo mini
Post by: RayB on June 04, 2008, 02:33:34 pm

I will post a close up of that t-molding. It's actually black with 2 raised turquoise lines. I doubt I'll ever find a replacement (not that it even needs it)

Title: Re: Sega Turbo mini
Post by: RayB on August 19, 2008, 02:26:00 pm

Another angle with more detail.
I've done nothing with this one other than clean and play.