Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Vash on June 01, 2008, 05:01:10 pm

Title: Help with router bit for t-molding
Post by: Vash on June 01, 2008, 05:01:10 pm
Okay.  I have a cab made with 5/8" MDF, and I'm planning on buying http://www.t-molding.com/store/product.php?productid=5&cat=0 that t-molding.  I'm going to use an exacto-knife to cut off the excess, but I need to order the correct bit to cut the wood at all.  I don't know what size, though I hear the three bladed is what I'm looking for.  Can anyone help?  A link to an online store would be excellent.
Title: Re: Help with router bit for t-molding
Post by: Doctor Ugs on June 01, 2008, 06:49:20 pm
http://www.t-molding.com/store/product.php?productid=55&cat=6&page=1

should be this one.
Title: Re: Help with router bit for t-molding
Post by: Timstuff on June 01, 2008, 10:06:24 pm
It says "Requires a slot cutting arbor, such as the A200B or equivalent." Does that mean you'd need an adapter to hook this up to a router?
Title: Re: Help with router bit for t-molding
Post by: Doctor Ugs on June 02, 2008, 12:16:11 am
It says "Requires a slot cutting arbor, such as the A200B or equivalent." Does that mean you'd need an adapter to hook this up to a router?

this is the arbor in question
http://www.t-molding.com/store/product.php?productid=54&cat=6&page=1

the blade alone wont do you any good if you aint got the right arbor to put it on.
Title: Re: Help with router bit for t-molding
Post by: Timstuff on June 02, 2008, 12:17:09 am
OIC