Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: max101 on May 23, 2008, 12:15:12 pm

Title: Orion A-One AM-0629 19"
Post by: max101 on May 23, 2008, 12:15:12 pm

Hi

New member here.

I am trying to find the schematics for this Orion A-One AM-0629 19", came out of a Jungle-Hunt cabinet.

I could not find the matching Kortek or SI models on the net.

Picture attached.

Thanks for your help.

Max

 

Title: Re: Orion A-One AM-0629 19"
Post by: grantspain on May 23, 2008, 06:04:38 pm

rare as rocking horse poo schems for these,i don't think you will ever find one
whats the problem apart from the fuse missing

Title: Re: Orion A-One AM-0629 19"
Post by: max101 on May 23, 2008, 06:50:29 pm

I installed an electrolytic cap kit a few years back and it actually worked fine for a while.

I just tried it after a few years sitting outside... and it takes 20 minutes before it "warms up" and the image somewhat focuses.

I started replacing the power resistors and I was thinking to replace some of the film capacitors, see if it makes any difference.

Max

Title: Re: Orion A-One AM-0629 19"
Post by: grantspain on May 23, 2008, 07:54:56 pm

damp has got inside the tube,it would need a few days at room temperature before seeing some improvement

Title: Re: Orion A-One AM-0629 19"
Post by: Ken Layton on May 24, 2008, 12:45:53 am

This was sold by Space Age Electronics (now out of business). I might have a schematic.

Title: Re: Orion A-One AM-0629 19"
Post by: Ken Layton on May 30, 2008, 11:09:18 am

I just checked my schematic. It's for a Korean A-One model AP-0621 which was distributed in the USA by Space Age Electronics, 26524 Golden Valley Road # 507, Saugus, Calif. 91350 phone: (805) 252-4400.

My schematic I got back in 1991.