Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: grbgemen on May 15, 2008, 02:19:19 pm
-
Restoring a MKII cabinet. All that i need is the speaker(s). Guy i bought the cab from has the speaker still but he is next to impossible to get a hold of. Been trying for almost a month.
Anyways, the cabinet has a big hole and a little hole. Not sure what goes in there. Been searching for one but cant find anything. Dont really know what im looking for.
-
woofer and tweeter? I can go home and check, but thats a couple hours from now. I'll post pix if no one beats me to it
-
I believe it's probably the same setup as my MK1. The speaker that goes with the big hole handles mid - bass, and the the other one high - mid. One or both have a cap attached, I'd have to look when I get home.
My big speaker was missing when I got it, I just replaced it with a crappy one from WalMart and it sounds fine.
-
well i went outside and measured it. looks like the big hole is 5 1/2" while the small looks like 2 1/4". I was looking through the bottom mesh when i measured so i could be wrong on the sizes. pretty sure the big one is 5 1/2" though.
-
no, those sound about right.
it is a woofer/tweeter set up, Im home but I cannot find my security torx bits so I cant get the mesh off and I dont see anything in the book with sizes. just get a speaker that wont fall through the hole and you should be ok =) or msg mk3fan he has a MK1,2,4 dedicated and he build his own UMK3 so he should definitely know