Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: ScooterMAC on May 10, 2008, 02:12:10 am

Title: Disabling NullDC GUI
Post by: ScooterMAC on May 10, 2008, 02:12:10 am

Is there a way to disable the GUI of nlldc? I Searched the forum and google but couldn't find anything. I also couldn't find the option under the config file. Was there something I missed? It's not that big of a deal, it would just look nicer when games are loaded from MameWah. Thanks.


**EDIT**
Just to clarify my problem. When the game is selected under mamewah, the nulldc gui screen shows for about 2 seconds or so. I just wanted to get rid of this. Thanks.

Title: Re: Disabling NullDC GUI
Post by: northerngames on May 10, 2008, 10:49:25 am

check for a .ini perhaps look for something like launch gui 1 and set it to 0 if it can be found or even possible.

Title: Re: Disabling NullDC GUI
Post by: ScooterMAC on May 10, 2008, 11:12:00 pm

Quote from: northerngames on May 10, 2008, 10:49:25 am

check for a .ini perhaps look for something like launch gui 1 and set it to 0 if it can be found or even possible.

There is a line that say "load gui on start up=blabla.dll" I changed that to =0. But when it loads it comes up with a error. I also tried leaving it blank.

Title: Re: Disabling NullDC GUI
Post by: northerngames on May 13, 2008, 03:45:01 pm

perhaps leave it on 1 for start but on close make it 0 if possible.

Title: Re: Disabling NullDC GUI
Post by: ScooterMAC on May 14, 2008, 09:48:11 am

Quote from: northerngames on May 13, 2008, 03:45:01 pm

perhaps leave it on 1 for start but on close make it 0 if possible.

There is not a option for that. Just load gui on startup.

Title: Re: Disabling NullDC GUI
Post by: northerngames on May 14, 2008, 11:52:47 am

is your mamewah dash and the gui dash in question set at the same resolution setting with the same 16 or 32 bit color setting?

could try that if they differ becuase I know it can cause flicker.