Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: jw2000uk on April 25, 2008, 04:08:03 pm

Title: Happ Joystick Install Question - Pivot Cylinder???
Post by: jw2000uk on April 25, 2008, 04:08:03 pm

Hi, First off thanks for such a top forum,Im in the process of making my own MAME machine.

But ive got a question.

With the Pivot Cylinder installed,my joystick wont go long enough,Without it it seems ok.

Am i doing something wrong?

Cheers


(http://i6.photobucket.com/albums/y208/jw_2000_uk/DSCF0422Medium.jpg)
(http://i6.photobucket.com/albums/y208/jw_2000_uk/DSCF0423Medium.jpg)
(http://i6.photobucket.com/albums/y208/jw_2000_uk/DSCF0424Medium.jpg)

Title: Re: Happ Joystick Install Question - Pivot Cylinder???
Post by: u_rebelscum on April 25, 2008, 06:11:59 pm

You have to push the white actuator piece up and the joystick handle down when you put on the E-clip.

Title: Re: Happ Joystick Install Question - Pivot Cylinder???
Post by: jw2000uk on April 26, 2008, 03:02:58 am

EDIT.

K i think ive got it,basically i needed to push the spring together,By doing what you said,Then there's just enough room for the E-Clip.This correct.

Thanks for you help m8.