Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: noobofthecentury on April 10, 2008, 09:16:50 pm
-
besides krazy glue.
-
Photo glue? Comes in spray cans. Guess you need to primer the MDF first though.
-
prime the mdf, then use this?
http://www.shop.com/3M_Photo_Mount_Spray_Adhesive-36355024-p!.shtml?trk=4
-
Well I'm not exactly sure what you are trying to do, but yes I used that to glue my control panel overlay onto an MDF panel. I used the same brand and product name.
On the other hand, I don't think you would be able to glue down a full piece of sideart with that without getting ugly folds or bubbles trapped underneath. It sticks pretty quickly and I don't think allows any adjusting after you put it on, so you cannot get airbubbles out if you trap them in.
-
i experimented with elmer's wood glue with a photo paper and mdf not primed
it stick really well until now, i cant move the pic at all
will it last? lol
2nd question, what should I put something over it, to somewhat protect it
I dont want to put lexan or anything.. cause It is not for a control panel where you gonna bang on it. its just side furniture art.
-
Go here:
http://www.koenigs.dk/mame/eng/step.htm
Koenigs used a varnish over the top of a poster, and it turned out very nice I must say! :cheers:
-
is polyurethane spray count as varnish?
if its not, which 1 is better for after painting wood?
I tried to look for varnish online, but none of them say its for pictures/photo paper
can u link me to one?