Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: AE35 on March 14, 2008, 01:17:46 pm

Title: Question about soft15kHz and connection to arcade monitor
Post by: AE35 on March 14, 2008, 01:17:46 pm

Hey all!

In the near future I will be using soft15kHz so I can output 15kHz to my arcade monitor.

But I am puzzled by how to do this....the gfx card outputs in VGA(RGBHV) and arcademonitors use RGBS...how
I should I get HV-sync to single-lead sync?

Any advice is welcome! I need to get this working :)

Thanks,

Nicholas

Title: Re: Question about soft15kHz and connection to arcade monitor
Post by: ahofle on March 14, 2008, 02:05:25 pm

It's called "composite" sync.  You would just tie together the H and V sync into the one sync wire that leads to your arcade monitor.  Just make sure that's what your arcade monitor requires (some support composite and some support separate H and V sync).