The NEW Build Your Own Arcade Controls

Main => Main Forum => Topic started by: ivwshane on March 06, 2008, 01:32:34 am

Title: led-wiz plus led-wiz+gp?
Post by: ivwshane on March 06, 2008, 01:32:34 am

Is it possible, and by possible I mean relatively easy to use with various light controlling software, to use both an led-wiz plus and a led-wiz+gp?

I plan on using lighted rgb led buttons, but with 7 buttons per player I would max out the standard 32 port led-wiz so I would need at least a 16 port led-wiz and since I also need something to control a few extra buttons I was looking at the led-wiz+gp to take care of both requirements.

Is there any limitations to this setup? If there isn't how would I order this? Do I order a standard led-wiz (device id 1) and then order the led-wiz+gp (device id 2)?

Title: Re: led-wiz plus led-wiz+gp?
Post by: RandyT on March 06, 2008, 02:32:03 am

Quote from: ivwshane on March 06, 2008, 01:32:34 am

Is there any limitations to this setup? If there isn't how would I order this? Do I order a standard led-wiz (device id 1) and then order the led-wiz+gp (device id 2)?

In order to maintain compatibility with existing software, both devices use the same USB ID's.  Therefore, to use both on the same system, you'll want to get LED-Wiz  Dev#1 and LED-Wiz+GP Dev#2. 

RandyT

Title: Re: led-wiz plus led-wiz+gp?
Post by: ivwshane on March 06, 2008, 02:52:04 am

Thanks.

That makes things much easier and a little cheaper for me:D