Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: AE35 on March 05, 2008, 08:07:16 pm
-
Hi!
Can anyone give me a hint as to where I can get a Jamma harness, WITH clear markings noting what's
5v, P1 up etc...
Thanks!
Nicholas
:)
-
I like the harness from bob roberts. Bob's the only one that I know of that doesn't skimp on the power rails.
-
2nd for Bob's harness ...
-
3rd!
-
I also used Bob all the time... but I just bought 2 from this place. Good price and they arrived quick.
http://www.jammaboards.com/store/jamma-harness/prod_146.html
-
I also used Bob all the time... but I just bought 2 from this place. Good price and they arrived quick.
http://www.jammaboards.com/store/jamma-harness/prod_146.html
It's a good price, but:
1. It appears that they use the same gauge wire for signal and power which I don't like to do. Can't tell for sure so let us know.
2. I prefer not to have the wires soldered to the jamma connector.
-
Arcadeshop has the good harnesses.
http://www.arcadeshop.com/parts.htm#Harnesses
So does Lizard Lick:
http://www.lizardlickamusements.com/pages/electrical.shtml
For even cheaper prices here's Alva Amusements' alternate website:
http://www.realpages.com/sites/alvaamusement/page2.html
-
I second the http://www.jammaboards.com (http://www.jammaboards.com) harness... Bought one from them, and an UMK3 "Kick" harness... Good stuff... Comes with a big, easy to read sheet, showing you where everything goes etc...
Not only did it cost me only $17 shipped, but it was at my house in a matter of about 3 days...
-
Do any of these places sell harnesses with the molex connectors for the cp and coin door? I can't tell in the pic if the arcadeshop "super harness" does or not.
-
A "super Jamma" harness is indeed fully connectorized. That's why it costs more.
-
Thanks Ken. I thought that might have meant they just added the quick disconnects.