Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: northerngames on February 27, 2008, 02:03:47 am
-
I am offering my services for XBOX 360 southpaw controller mods custom made with options for a permamnt solution for left handed people
I also am now offering rapid fire mods the descripton of these is located toward the bottom of this post
(http://i269.photobucket.com/albums/jj70/northerngames/360pcbpic.jpg)
(http://i269.photobucket.com/albums/jj70/northerngames/octrapidfire.jpg)
This service mostly pertains and benefits to left handed people only.
PLEASE NOTE: ""THIS IS FOR A SERVICE ONLY I DO NOT SUPPLY ANY XBOX 360 OR PS3 CONTROLLERS WHAT SO EVER YOU SEND YOUR ACTUAL CONTROLLER TO ME AND I WILL CUSTOMIZE IT TO YOUR PREFFERENCE'S AND THEN I SEND IT BACK TO YOU COMPLETED WITH THE OPTION'S YOU REQUESTED TO HAVE DONE TO IT""
The options avialable are below you can mix and match them anyway you would like in any combination and it does not effect the cost or shipping becuase it is a flat rate service fee.
Options you have to choose from:
1. permanet southpaw thumbsticks swap
explanation: this swaps the UP/DOWN/LEFT/RIGHT functions of the left thumbstick over ot the right thumbstick functions and the right thumbstick functions become the left thumbstick functions for a permanent solution for left handed players for the games that do not support this as an option for games like gears of war is a good example..
2. thumbstick button swap "Or clicker as some may call it" this is an option that will swap the thumbstick buttons from L to R / R to L
explanation: this mod swap's the thumsticks button/clicker functions from the left side to the right side and vice versa. this is an option to you free of charge but it is not required.
3. trigger swap L to R / R to L this is another option left to you free of charge and is not required.
explanation: this mod swap's the left trigger to function as the right and the right functions as if it were the left.
4. bumper swap this swap the bumers above the triggers to make the right work as is it were the left and vice versa.
I can even all of the above singley or any in any combination all the option's above are your choice.
I Do both Microsoft branded models and it don't matter if they are hard wired or wireless I do both.
I have done many of these already for others and never had any problems or complaints but if one should happen at anytime just contact me and send it back and I will get it fixed up and sent back in no time no problem.
turn around time is within 1 week upon recieving your controller and payment.
(http://i269.photobucket.com/albums/jj70/northerngames/art-1.jpg)
I also do controller mods classic's to present to work with arcade control panels for those who want to put a console in there cab and any custom led work.
dreamcast 2-Player arcade box example I recently added the analog signals to this so it's on added switch but there not pictured yet .
(http://i269.photobucket.com/albums/jj70/northerngames/6dcboxclosed-1.jpg)
(http://i269.photobucket.com/albums/jj70/northerngames/7dcboxopened.jpg)
Asking $40.00 with return shipping included for the 360 & PS3 southpaw mod service
as for the video game console controls modded to work with your arcade controls it is kinda hard to give price's becuase of the amount of different consoles out there so just pm me on what you would like done and how and we'll go from there
:cheers:
I would consider these titles as trade or partial trade toward my service depending on the game or games offered as equal value toward my service fee.
Games can be complete with box & manuals or not new or used but the PC versions must have legit keys if they require one.
if you have any on the list to trade or put toward trade with cash post what you got.
not really looking to buy any at the moment but would do trades toward for my service's for some.
Arcade: New Buttons, Joys, U360's, Rotary Joy's, Trackballs, encoders like Ipac2, keywiz, act labs or lcd topgun light guns etc. pretty much anything that goes on controls panels control wise.
Dreamcast:
Official memory card 1-4 total
Official Grey/white controller
official S-video cable if they even made one.
Ps2 V4:
Fuse's
black dual shock controllers total 1-2
official memory cards
official network adapter
PC Games:
Front line: fuel of war
Company of heroes 2 opposing front
medieval 1&2 + kingdoms
medal of honor airborne assualt
crysis
kane & lynch
jut land
mount and blade
med evac
fatal frame 3
XBOX 360 Games:
Baja 1000
Army of 2
BAJA
KANE & LYNCH
MERCINARIES 2
SOUL CALIBUR 4
TEKKEN 6
STREET FIGHTER 5
RAINBOW 6 VEGAS
MX VS ATV untamed
facebreaker
orange box
kingdom under fire: circle of doom
bully
need for speed pro street
dark sector
medal of honor airbourne assualt
alone in the dark
ninja gaiden 2
hellboy
conflict denied ops
gears of war 2
farcry 2
pure
gta 4
battlefield bad company
fallout 3
fable 2
dead space
saints row 2
call of duty world at war
mirror's edge
left 4 dead
operation flashpoint 2 dragon rising
dragon age origans
fuel
rage
ninja blade
velvet assassin
quantum of solace
silent hill homecoming
brothers in arms hells highway
star wars force unleashed
prince of persia limted edition
DVD Movies:
must be complete only
TIME LIFE: THE WORLD AT WAR 4 disk + bonus german disk set
TIME LIFE: VIETNAM AN AMERICAN HISTORY 3 disk set
-
I am now considering doing these types mods as trade toward the following things:
gamecube console
gamecube accessories
gamecube lcd
stock dreamcast branded controllers
dreamcast memory cards
all must be working complete and in good shape.
I will match the value if it is off by doing more then one of your controllers or paying the difference.
-
if anyone has any extra SONY PSP parts like a complete broken one or a charger, battery pack etc. pretty much any accessiory for them I would consider them toward trade for some of the controller mods I do for any console.
still looking for the above list also.
-
I also can add any color leds or extra buttons or even rapid fire mods if someone need's a different type of controller mod then listed above just ask.
-
I will do some of these service's for some 512mb or 1gb ddr400 pc3200 SDRAM for desktop pc's as trade if needed also.
-
I have a few to do this coming week but can do a couple more if anybody is intrested.
have something you need done not listed just ask I should be able to do it.
-
I will have time to do 1-2 more and then I will not be accepting anymore for another week or so after them becuase I will have more then enough to keep me busy for a bit.
-
bump :o
-
added a picture of my recent work this guy had the triggers the thumbsticks and the thumb buttons swapped so it is 100% southpaw all around.
when he got it back and wrote me he was geeked :laugh2:
also for anybody that has bad arcade boards or chassis and know where the problem is and know what parts need to be swapped but dont know how to solder or desolder I am willing to take on any task really and do them for cheap.
-
bump
I will also consider doing some of these mods towards trade for dreamcast and gamecube just let me know what you got for either console.
-
bump
-
anybody ready yet?
-
bump
-
been busy doing these for GTA4 leftys but I can squeeze in some more if anyone is intrested.
-
bump
-
bump
-
Chad (northerngames),
I got your message below.
I thought you said you could do them as you requested the part numbers before I sent them. Can you tell me when you know you will be able to do them or not by? If you cant do them obviously I would like you to send the 4 six-axis back to me and refund my $320 for modding (keep the $20 mail) if you cant mod them.
It may have been better if you had just bought the six-axis models you know (I assume they will work with UK PS3's?) with the $320 I sent and then mail the 8 controllers back to me. (4 modded that you bought and 4 not modded) Is that possible instead as you should be able to mod them then? I can settle up the extra modding charge when they are done and I receive them.
Graham
Hi I ran into a bit of trouble with these.
there a version pcb that I have never seen or done before usually the pots have
3 legs and these have 4.
I am currently tracing this pcb type out so they can be done the correct way but
as far as I know these have not been done by anyone yet and I could not find any
info on them on the net.
this has delayed me becuase I am figuring out what goes where but I am about 80%
done with geting it figured out.
if these where like the other six axis I am use to I would have had them done
and on there way back days ago.
please let me know if you would like for me to continue and do them or if you
want me to send them back with a refund.
I almost have them figured out though.
-
I am hoping I havent been conned out of my $340 and 4 controllers I sent here ($480 in total) :(
I will post up here if I you're not but hoping you are genuine Chad. All done on goodwill sending the money and PS3 six-axis controllers as you requested before modding and all that.
Graham
-
Chad,
Please could you send my controllers back and also refund my $340 (less the cost of sending the 4 six-axis back to me) as soon as possible.
My Paypal email for refund is
Please could you send the controllers by recorded delivery to make sure they get here and take the cost from my $340. My address to send the controllers is
Maybe we were unlucky this time and thanks for trying anyway.
Will you be posting the refund in the next day? and the controllers the next week. Please confirm asap as I wont be delayed long before I have to assume you are not genuine which I still think you are genuine.
Thanks,
-
refund sent and I will be sending the controllers back tommorow.
I am swamped with controls right now and these ps3 six-axis versions I am stumped with and not going to offer service for any ps3 stuff anymore.
I am still doing the xbox and xbox 360's but I have 9 sitting here to do so it may be better to wait another week before anybody decide's to send me more.
also could you post you recieved your refund so I dont look like some rip off now it would be appretiated thanks.
-
Hi Chad,
Yes received the refund ok. Thanks very much for trying. Hope we can still find some 3 legged as you have done them before. Get back to me if you can find any.
Thanks
-
I am caught up and dont have anymore here to do so if anybody is intrested I am ready to do more again.
-
bump
-
bump
-
Now also offering rapid fire mods for $40.00 with your return shipping included.
this mod can make rapid fire mode to the left or right or both triggers to shoot 24 times per second.
some games cannot even handle that speed but still would shoot as fast as possible for that particular game.
I will add a button for each side so it can be turned on/off by the push of the added button or buttons underneth depending on one or both triggers being modded.
still doing southpaw and legacy mods also if interested.
-
bump
-
What is the charge for 2 360 controllers (I provide) wired to a box with db-25's?
Same for dreamcast(I send controllers).
I would like to be able to play 360 and DC in my candy cab.
thanks!
-
Daniel B. YGPM
I still have time to do some more if anyone is interested
-
bump
-
bump.
I may consider accepting some buttons and joys as trade toward's my controller mod service of your choice.
I also would do two complete controller mods for a used arcade spinner that can mount in a 3/4" wood CP.
-
do you do any cross pad mods on the 360 joysticks?
-
bump
Shieldwolf I PM'ed you
-
bump
-
bump
I also would offer one of these service's plus a little cash for a gamecube component or D-terminal cable
-
bump
-
bump
-
bump
I also am still williing to offer any of my service's as trade toward's a gamecube component cable or a D-Terminal cable.
-
no longer looking for a gamecube component or D-teminal cable anymore :burgerking:
-
have a deal pending for the spinner mentioned prior so I am no longer looking for one of them anymore either.
I would still consider some new buttons and joys or possibly a lcd topgun or two as trade/discount also.
if anyone has a different controller like a racing wheel or flight stick or something that need's to be custom rewired I also am willing to work on other controllers or special projects just ask.
-
Added bumper function swap to the options of choice these can be made with any of the options of your choice at no extra charge.
-
bump
-
I am still considering arcade parts as trade toward my service's if anyone would like to go that route.
I would consider:
spinners
buttons
joysticks
ultimarc boards like j-pac, i-pac, opti-pac etc.
groovy game gear boards like keywiz, optiwiz etc.
black gmaecube lcd screen intec or interact brand
full jamma harness with kick harness
may consider other stuff too just make an offer.
-
I just ordered enough to make 13 more kits if anyone wants theirs done I also have a few kits in stock and ready to install.
I also believe I am going to start stocking more of these and selling my own kits for anyone that would like to install there own rapid fire trigger mods but I need to make a tutorial to install them first.
-
I also would like to add that I would consider some act labs or lcd topguns as trade toward any of my service's if anyone would like to trade and I would pay the difference in cash.
-
now offering the dual trigger rapid fire mod service for $35.00 with USPS priority return shipping included at no extra charge :cheers:
-
bump
-
bump
-
bump
-
bump
-
bump
-
bump
-
bump
-
I would consider these titles as trade or partial trade toward my service depending on the game or games offered as equal value toward my service fee.
Games can be complete with box & manuals or not new or used but the PC versions must have legit keys if they require one.
if you have any on the list to trade or put toward trade with cash post what you got.
not really looking to buy any at the moment but would do trades toward for my service's for some.
PC Games:
Front line: fuel of war
Company of heroes 2 opposing front
medieval 1&2 + kingdoms
medal of honor airborne assualt
crysis
kane & lynch
jut land
mount and blade
med evac
fatal frame 3
XBOX 360 Games:
Baja 1000
Army of 2
BAJA
KANE & LYNCH
MERCINARIES 2
SOUL CALIBUR 4
TEKKEN 6
STREET FIGHTER 5
RAINBOW 6 VEGAS
MX VS ATV untamed
facebreaker
orange box
kingdom under fire: circle of doom
bully
need for speed pro street
dark sector
medal of honor airbourne assualt
alone in the dark
ninja gaiden 2
hellboy
conflict denied ops
gears of war 2
farcry 2
pure
gta 4
battlefield bad company
fallout 3
fable 2
dead space
saints row 2
call of duty world at war
mirror's edge
left 4 dead
operation flashpoint 2 dragon rising
dragon age origans
fuel
rage
ninja blade
velvet assassin
quantum of solace
silent hill homecoming
brothers in arms hells highway
star wars force unleashed
prince of persia limted edition
DVD Movies:
must be complete only
TIME LIFE: THE WORLD AT WAR 4 disk + bonus german disk set
TIME LIFE: VIETNAM AN AMERICAN HISTORY 3 disk set
-
bump
-
bump
I am also looking for a ps2 V1-3 controller port assembly
-
bump
-
I am looking to get some of the tekkens for ps1 and ps2 so if anyone has some takkens to get rid of I would consider them as trade towards my service for a discount or if you have enough I would trade the service straight up for the games.
looking for tekken 1-5 & tag
also looking for resident evil outbreak 1 & 2 for ps2
-
I am offering my services for XBOX 360 southpaw controller mods custom made with options for a permamnt solution for left handed people
I also am now offering rapid fire mods the descripton of these is located toward the bottom of this post
I know this post is very old but I am a left hander and have been looking for something like this... I see no way to contact you other then this post so I am posting here. If you are still offering your services please post back or email me I set it to let users email me. Thanks..
-
yeah I still do them daily pretty much.
I will pm also.
-
yeah I still do them daily pretty much.
I will pm also.
It will not let me reply to your pm. I don't get it but ok... I have like 30 controlers.. most all are the old white ones and a few black ones from the 1st elite xbox. So sending you 1 or 2 isn't hard for me as I own like 10 xboxes... All of them with the same issue, Dvd drives quit reading! Anyway moving on.. I get this is not easy or everyone would offer it. However my issue is if I only swap the sticks my bumpers and triggers are back words now. and even with the swaped sticks it doesn't change the fact I can't jump in my COD games.. You see changing the settings to lefty in the game works well but leaves me with on big issue, I use the right stick to run with. So I have to take my hand off the right stick to hit the A button ("JUMP button") and all that does is make me jump up but with out moving I can never jump over anything. This is the only reason I want a lefty controler.. I could do with out all if I just had the A button moved somewhere where I could use it.. but with only that done I still can't play other games like army of two or Medal of honor or fallout or 100 more games I wish I could play.. I try right handed but it's just so backwords so I give up on it. as a matter a fact if I could just swap the d-pad and buttons I really wouldn't need anything else swaped for COD games anyway... But in the end with out a full swap it's always gonna be wierd.. It sucks but it's true...
-
I can move the buttons wherever you want really.
as for the d-pad and xyab swap it is also possible but risky time consuming and not cheap if I am going to even attemmpt swapping them too.
-
I got your email.. guess your on ebay too :) so I guess we can talk on email from here on.. But what if we did the sticks, clickers and bumbers and look in to doing one button (The jump button).. I emailed you a photo on something like what I'm talking about..