The NEW Build Your Own Arcade Controls
Main => Buy/Sell/Trade - non-retail => Topic started by: jacenwon on February 12, 2008, 01:56:27 am
-
You may've seen this in the project forum, and now it's on ebay. easily one of the cleanest mame OR candy machines you'll ever see, hands down. the jamma connector is still installed, and in perfect condition. the cabinet itself is 100% original w/ no yellowing at all. The only physical mods done to her would be the custom control panel, the pushbutton start on the backside, and the pinball buttons added to the front and side of the deck. the monitor/marquee, computer & speaker power are all connected to a surge protector located inside the cabinet, with one plug running out of the back... allowing you to use just one outlet to run the machine :)
Here's some specs:
- Cabinet = Super Neo 29 (Japanese Sitdown Style) w/ working keys and locks + original user manual (still in plastic).
- Monitor = 29". No burn in, and looks perfect!
- Marquee = Lights up beautifully, and looks great! Slides off to insert your custom art very easily!
- Controls = Custom drilled (vinyl covered) panel w/ Happ Competition Joysticks, Happ Translucent Blue Pushbuttons, and Sanwa Player Buttons (all parts brand new).
- Coin Door & Mech = Works perfect w/ qtrs or tokens + I'm including 100 MAME tokens from BYOAC.
- Speakers = 2 Stereo speakers that work great! I added volume control, located inside the coin door.
- Computer = Dell GX270 w/ 2.6ghz processor & 1gb memory w/ 200gb hard drive.
- J-Pac = Installed to allow the arcade controls & monitor to work with the computer (duh).
- ArcadeVGA = Installed to allow the monitor to work on the computer (duh).
- Pushbutton Start has been installed on the back of the unit allowing you to boot up/down with ease!
- Artwork = All artwork was installed less than a month ago. VERY clean & professional by mamemarquees.com :)
- I'm also throwing in 2 folding stools that match the cabinet perfectly!
Here's the link to the auction:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250215552239&ssPageName=STRK:MESE:IT&ih=015 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250215552239&ssPageName=STRK:MESE:IT&ih=015)
And here's some decent pics of her:
(http://jasonwbrown.com/neo/mame/01.jpg)
(http://jasonwbrown.com/neo/mame/02.jpg)
(http://jasonwbrown.com/neo/mame/03.jpg)
(http://jasonwbrown.com/neo/mame/04.jpg)
(http://jasonwbrown.com/neo/mame/05.jpg)
(http://jasonwbrown.com/neo/mame/06.jpg)
(http://jasonwbrown.com/neo/mame/07.jpg)
(http://jasonwbrown.com/neo/mame/08.jpg)
(http://jasonwbrown.com/neo/mame/09.jpg)
(http://jasonwbrown.com/neo/mame/10.jpg)
(http://jasonwbrown.com/neo/mame/11.jpg)
(http://jasonwbrown.com/neo/mame/12.jpg)
(http://jasonwbrown.com/neo/mame/13.jpg)
(http://jasonwbrown.com/neo/mame/14.jpg)
(http://jasonwbrown.com/neo/mame/15.jpg)
(http://jasonwbrown.com/neo/mame/16.jpg)
(http://jasonwbrown.com/neo/mame/17.jpg)
(http://jasonwbrown.com/neo/mame/18.jpg)
I wish i could keep her :dunno
-
Nice cab. I've always liked these machines but any of those moulded plastic/metal machines cost the earth over in the UK. If I had the time to build a new one just for my own use, this is what I would go for.
Out of curiosity; reason for sale?
-
yeah, if you don't find one in good physical condition, you're screwed.
tax season out here in the states, and i owe a bit :(
-
That's a pretty cabinet... if I was still single and living in SoCal I would be all over that!
Good luck!
-
God I want a Super Neo 29... I'll get one someday (I hope). It doesn't help that most are in CA and I'm here in NJ.
Great looking cab, good luck with the sale.
-
thanks, point.
i'm knockin' the buy now to $1300.
if anybody's really interested, i can go as low as $1200 :)
auction here:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250215552239&ssPageName=STRK:MESE:IT&ih=015 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250215552239&ssPageName=STRK:MESE:IT&ih=015)
-
Lovely cab, pity you can't hang onto it. Best of luck with the auction
-
DAMN... That cabinet is sick.
I was lucky enough to find a guy giving a MAME'd jaleco candy cabinet away for $250, came with pc and jpac installed. The control panel is pretty hacked up but I looking to restore (hopefully like this).
But I was wondering what video card you are using? Is that FE mamewah?
-Derrick
-
it's running an ArcadeVGA card. works flawlessly.
the fe is a mamewah version, slightly modded to suit my personal prefs :)
awesome deal, man! $250? you got pics?
thanks for the luck, dexter!
-
Man, if I was in CA, I'd be owning this thing by now.
of course, we would have haggled over a case or 2....but you know...
-
haha, and if they were guinness, you would've won :)
-
It definitely feels like a "black & tan" kind of weekend.
If I didn't say it before, good luck on the sale.
-
no luck yet. folks still lowballin' me.
i'm dropping it down to a $1,000 reserve... hop on it if you're interested, locals :)
gotta move her asap
-
Sweet cab, email sent!
-
What's with the ebay listing on this? I keep getting "invalid Item"
-
the auction was only a day long. had to relist 2wice because of bogus bidders.
i think i may have a taker for 1k - will find out tomorrow.
-
Is this still for sale, highly interested.
-
sorry, just sold her an hour ago.
have a good one
-
Congraturations!