Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: yukonblaze on February 04, 2008, 10:35:33 am

Title: TRON joystick
Post by: yukonblaze on February 04, 2008, 10:35:33 am

Replacing leafswitch oin joystick and found the coiled wire housing the two wires to be broken.  Is this necessary to be there or can it be replaced with standard wirte wrap?

Title: Re: TRON joystick
Post by: Hoopz on February 04, 2008, 12:31:03 pm

Standard wire should be fine.  I have a Tron wiring harness if you want it.  I re-wired mine recently and don't have a use for it. 

Title: Re: TRON joystick
Post by: yukonblaze on February 04, 2008, 01:50:43 pm

I am actually asking about the 'spring' looking thing going from switch, through joystick, to the connector.  I was wondering if I could remove the 'spring'.
THanks

Title: Re: TRON joystick
Post by: Hoopz on February 04, 2008, 01:54:12 pm

Sorry, I misread your post.  No, you don't need it there.