The NEW Build Your Own Arcade Controls

Main => Buy/Sell/Trade - non-retail => Topic started by: 3dmacman on January 11, 2008, 10:34:19 am

Title: Pricing on coin doors, and other parts
Post by: 3dmacman on January 11, 2008, 10:34:19 am: I have a few coin doors in various states, some have missing pieces some have coin mechs still attached. Another item I have is an orignal NBA Jam Marquee silkscreened to plexiglass, it has a lot of scratches and the image is starting to crumble a bit, I would take $5 for that plus shipping. I will post pictures on mon. when I get back in the office. Just thought I would clear out some room.

Added stuff. June -5-08
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 09:55:42 am: I have 37 pushbuttons for sale. 8 green, 8 blue, 10 yellow with two missing nuts;3 missing switches, and 8 white, 3 black 1 missing switch. I am looking at a dollar a piece, I also have 6 leaf switches, two red, 2 blue, 2 orange, in translucent colors. I am also asking for a dollar a piece for them. These are pulls from old cabs as well as a bunch of other stuff I will upload here this week. pm me for details on shipping. I will accept check or money order, or paypall.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 09:57:31 am: One original nba jam marque silkscreen on plastic taped to a sheet of plexiglass, some of the marque is starting to rub off. I want only $5 for this. I also have a neo geo blank slot marquee, it has world heroes 2 in the slot, good condition for marquee, wh2 a little faded. Buy this and I will throw in a neo geo cup instruction card. Asking $8.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 09:59:46 am: One over under door with coin mechs attached. I can't vouch for the condition of the mechs since these are pulled from old cabs. It is missing the coin reject buttons, the one in the picture is broke and missing the top to the button. You can buy these any where on the net for $2 to $4 a piece. I was looking in the range of $25 obo. pm offers
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 10:01:56 am: I have two wood cp and one metal cp. I would take $10 each for the wood cp with out joysticks, and the metal cp. I would like $15 for the cp with the joysticks still in them
ignore this post.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 10:03:13 am: I have one wood cp and one metal cp. I would take $10 each for the wood cp joysticks, and the metal cp.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 10:05:10 am: ~~I have two 28 pin jamma harness's for sale asking $2 for each or $3 for both.~~
SOLD
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 14, 2008, 10:08:32 am: I have ~~four~~ 8 = 8-way joysticks for sale, one missing switches. I would accept $5 each or two for $8. I must stress these are used and I can't vouch for the switches. All my prices do not include shipping and handling. Pm me so that I can get an estimate. I will try to go the cheapest I can on shipping. 6 are happ knock offs and two are x-gaming joys.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 17, 2008, 08:50:36 am: Bump
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 21, 2008, 04:30:04 pm: '
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on January 24, 2008, 09:44:42 am: I am willing to take trades, looking for a decent trackball, spinner, a bits limited smart power strip.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on February 04, 2008, 01:47:09 pm: '
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on February 05, 2008, 10:50:52 am: bumpy
Title: Re: Pricing on coin doors, and other parts
Post by: shardian on February 05, 2008, 11:48:55 am: Can you verify the metal panel is from a Taito cab? I am fairly sure it is.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on February 05, 2008, 02:01:51 pm: I am not sure these panels came from a neo geo conversion cab, I could measure them tonight and let you not tomorrow, right now I am at work.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on February 06, 2008, 12:37:19 pm: The metal cp measures at 22 3/4w X 10 3//4 total length.
Title: Re: Pricing on coin doors, and other parts
Post by: shardian on February 06, 2008, 01:17:05 pm: Quote from: 3dmacman on February 05, 2008, 02:01:51 pm
I am not sure these panels came from a neo geo conversion cab, I could measure them tonight and let you not tomorrow, right now I am at work.

Well if you saw the cabinet, did it look like this?
http://www.hyperspacearcade.com/ForSaleJungleKing.html
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on February 06, 2008, 02:07:42 pm: It was more of a generic neo geo cab, sorry.
Title: Re: Pricing on coin doors, and other parts
Post by: rhuel on February 11, 2008, 06:42:39 pm: Got the buttons today!!!

Thanks!
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on February 18, 2008, 04:07:50 pm: bump
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on March 10, 2008, 11:06:14 am: bump
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on June 05, 2008, 11:03:10 am: Added Stuff.
Title: Re: Pricing on coin doors, and other parts
Post by: SirPeale on June 05, 2008, 01:10:05 pm: How about a picture of the underside of that wooden CP. It's a Williams, I just can't figure out which one.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on June 05, 2008, 01:30:46 pm: I can set up a pic tomorrow, right now I am at work.
Title: Re: Pricing on coin doors, and other parts
Post by: 3dmacman on June 09, 2008, 10:25:40 am: Bump