Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: dskillz1 on January 04, 2008, 09:26:54 am
-
Hello
I currently have a slikstik Arcadecab with a classic panel and a ipac/2 running in it (Standard config never changed) . Has been running great for the last 4 years and just yesterday out of nowhere the player 1 joystick (8 way) and the 4 way joystick have stopped working. The are mapped to the same keys (up down left right). The only thing that works on the sticks is when I push up, it registers as a "v", also it only shows a "v" when I release it from the up position and this happens with both sticks. Im clueless with the Ipac , does anyone have any suggstions how to fix this? Also I did try it on 2 other PC"s and the same thing happens. Running Windows xp. Thanks a million!!!
DArryl
-
Sounds like either your Ipac got reset, or your output source isn't working correctly.
First thing first. If you are using PS/2..go to USB...or if using USB go to PS/2. After that, if still not working then reprogram it.
There are LED tests that I am sure Andy can help you with, but I would try the above if possible.
-
Thanks for the info! Will try when im released from my prison, TKIF!